Pre Terminated Fiber Optic Cable Assemblies Manufacturer
Pre-terminated cables make installs easy. You receive factory-polished ends on cables. These give very little signal loss. Faster setup happens with MTP connectors. Cables are flexible with a small diameter. The pulling eye can take much force. Operating temperatures can be very extreme.
You could get bend-insensitive optical fiber. Multimode uses a 50/125-micron core. Plenum jackets are safe for fires. Loss is low at 850 nm wavelength. Connectors can be LC, SC, also ST. A tight buffer guards the fibers inside. Wavelengths can be 1310 or 1550nm.
- Setup is very fast.
- You gain perfect ends.
- Signals stay strong always.
- Installation is very easy.
Why Pick Pre-terminated Fiber Cables Over Field Termination?
Pre-terminated cables have many pluses. Doing it in the field needs experts. But, avoid curing epoxy with premade. Pre-terminated options have low return loss. Fiber pieces and splicers are gone. Perhaps, use a cable with many strands. Benefit from low reflection using APC. Cables are tested well, exceeding norms.
The outside could be LSZH material. Choose simplex or the duplex kind. Single-mode fiber is nine microns. A thin cable works inside well. Performance becomes very consistent. Obtain ready-made lengths, saving much time.
Pre Terminated Fiber Cable Specifications
- Thông số kỹ thuật
| Đặc điểm kỹ thuật | Multimode OM3 | Multimode OM4 | Single-mode OS2 | Armored Multimode | Armored Single-mode | Indoor Distribution | Outdoor Loose Tube | Breakout 2.0mm |
| Fiber Core (µm) | 50/125 | 50/125 | 9/125 | 50/125 | 9/125 | 50/125, 9/125 | 50/125, 9/125 | 50/125, 9/125 |
| Max. Attenuation | 3.5 dB/km | 3.0 dB/km | 0.4 dB/km | 3.5 dB/km | 0.5 dB/km | 3.0 dB/km | 1.0 dB/km | 3.5 dB/km |
| Bandwidth (MHz.km) | 2000 | 4700 | >10000 | 500 | >10000 | 850, 2000 | 500 | 500 |
| Typical Length | Up to 300m | Up to 550m | Up to 10km | Up to 200m | Up to 5km | Up to 100m | Up to 2km | Up to 50m |
| Các loại đầu nối | LC, SC, MTP | LC, SC, MTP | LC, SC, MTP | LC, SC | LC, SC | LC, SC, MTP | LC, SC, MTP | LC, SC |
| Chất liệu áo khoác | PVC, LSZH | PVC, LSZH | PVC, LSZH | Steel, PVC | Steel, LSZH | PVC | PE, LSZH | PVC, LSZH |
| Nhiệt độ hoạt động | -20°C to 70°C | -20°C to 70°C | -40°C to 85°C | -40°C to 85°C | -40°C to 85°C | -20°C to 70°C | -40°C to 85°C | -20°C to 70°C |
| Số lượng chất xơ | 2-144 | 2-144 | 2-288 | 2-72 | 2-144 | 12-144 | 12-288 | 2-24 |
| Sức chịu lực nghiền | 1000 N/cm | 1000N/cm | 800 N/cm | 2000 N/cm | 2200 N/cm | 500 N/cm | 1500 N/cm | 800 N/cm |
Types of Pre-Terminated Fiber Cables
Indoor/Outdoor Cables
These cables offer much flexibility here. They resist sun and water outside. A special gel will stop water coming. These cables handle cold temperatures. You can pick loose tube design. Because, they often use multimode fibers. Find them with different connector types. Its outer jacket is strong plastic. Receive long lengths for big jobs.
Breakout Cables
Breakout cables connect to gear easier. Each fiber has a small subunit. Consequently, connect without needing patch panels. Fan-out kits are not needed often. A colored jacket helps in finding. Find with LC or even SC ends. Commonly, they use a tight-buffered design. Often using for inside short run. Get some fiber quantity cables.
Patch Cables
These cables make short area links. They link gear within a server rack. Usually, length ranges one to ten meters. Get duplex LC for very fast links. Simplex kind are ready to use, too. Moreover, you can pick any jacket colors. These allow ten Gigabit Ethernet speeds. Connector boots add to the protection. Multimode fiber is often inside.
Distribution Cables
These cables handle many fibers well. They have a small tight buffer. So, they fit well inside buildings. Use the cables inside racks or walls. Find configurations from 12 up to 144. Options are MTP and even LC. Factory does termination for best work. Furthermore, meet needed fire-retardant rules.
Armored Cables
These cables give added safety. Metal layer is stopping any damage. This will help in tough workplaces. Animals cannot bite through it. The armor gives it crush resistance. However, the flexibility can be reduced. The cables can have outer jacket. You can use up to 72 fibers.
Key Advantages of DEKAM Pre-terminated Fiber Cables
-
DEKAM cables greatly reduce the labor. Pre-made ends mean no field work. Quickly connecting many fibers takes minutes. Avoid doing complex splicing ever again. So, projects finish much more quickly. Enjoy much quicker install times easily. Modular connectors provide rapid linking. Cables come with tested ends.
-
DEKAM cables give consistent optical power. Every connector passes the strict tests. Consequently, failures or loss reduce greatly. You can benefit from a long warranty. Cables will have a strong pull force. Obtain improved Return loss with factory. Connectors undergo machine-polishing process.
-
DEKAM cables cut total expense. Reduced time lowers the on-site costs. You do not need expensive tools. Plus, there will be much less waste. The risk of mistakes is lower. Cables will offer very expected output. Save costs on fixes and checking. Return loss becomes very low.
-
DEKAM makes planning very, very easy. Simply order the exact lengths. Because inventory tasks get minimized, resulting in faster jobs. You receive the ready solutions timely. Pre-testing removes any field checks. The compact design will save space. Finally, Cables have very clear labels.
Tải xuống Danh mục sản phẩm DEKAM
Reliable Fiber Optic Solutions – Choose DEKAM
DEKAM gives great fiber options. Gain from precisely made cables here. Get consistent low insertion loss. Our fiber cables use best glass. These ensure fast transmission always. Pick from connector styles freely. Receive cable lengths of many feet. Jackets could be PVC or others. Get the long system use warranty. Experience lower delays with products.
Cáp liên quan khác (4)
A cable has factory connectors fitted. Factory work gives best performance also. Polishing of the fiber is precise. Core size may include microns. Get fifty Meter cables.
Yes, order needed, certain cable lengths. Cables arrive in one-meter steps. Custom lengths can reach two kilometers. The wait is often two weeks.
You have a few connector options. Common ones are LC, and SC. MTP connectors are also a option. These offer low dB loss.
Factory ending controls all quality levels. This lowers signal loss or bending. Polishing done in field is gone. A good core size used.
Installing is easier, but careful. Handle cables very gently always. Proper routing can help preventing harm. Using a pulling eye improves safety.
VI 
EN 
ID 
TL 
ES 
AR 
TH 
MS 
SW 
AM 
ZH