Pre Terminated Fiber Optic Cable Assemblies Manufacturer

Pre-terminated cables make installs easy. You receive factory-polished ends on cables. These give very little signal loss. Faster setup happens with MTP connectors. Cables are flexible with a small diameter. The pulling eye can take much force. Operating temperatures can be very extreme.

You could get bend-insensitive optical fiber. Multimode uses a 50/125-micron core. Plenum jackets are safe for fires. Loss is low at 850 nm wavelength. Connectors can be LC, SC, also ST. A tight buffer guards the fibers inside. Wavelengths can be 1310 or 1550nm.

Setup is very fast.
You gain perfect ends.
Signals stay strong always.
Installation is very easy.

MAELEZO YA BIDHAA

Tuma Uchunguzi Wako

Why Pick Pre-terminated Fiber Cables Over Field Termination?

Pre-terminated cables have many pluses. Doing it in the field needs experts. But, avoid curing epoxy with premade. Pre-terminated options have low return loss. Fiber pieces and splicers are gone. Perhaps, use a cable with many strands. Benefit from low reflection using APC. Cables are tested well, exceeding norms.

The outside could be LSZH material. Choose simplex or the duplex kind. Single-mode fiber is nine microns. A thin cable works inside well. Performance becomes very consistent. Obtain ready-made lengths, saving much time.

Pre Terminated Fiber Cable Specifications

Vipimo

Vipimo	Multimode OM3	Multimode OM4	Single-mode OS2	Armored Multimode	Armored Single-mode	Indoor Distribution	Outdoor Loose Tube	Breakout 2.0mm
Fiber Core (µm)	50/125	50/125	9/125	50/125	9/125	50/125, 9/125	50/125, 9/125	50/125, 9/125
Max. Attenuation	3.5 dB/km	3.0 dB/km	0.4 dB/km	3.5 dB/km	0.5 dB/km	3.0 dB/km	1.0 dB/km	3.5 dB/km
Bandwidth (MHz.km)	2000	4700	>10000	500	>10000	850, 2000	500	500
Typical Length	Up to 300m	Up to 550m	Up to 10km	Up to 200m	Up to 5km	Up to 100m	Up to 2km	Up to 50m
Connector Types	LC, SC, MTP	LC, SC, MTP	LC, SC, MTP	LC, SC	LC, SC	LC, SC, MTP	LC, SC, MTP	LC, SC
Nyenzo ya Jacket	PVC, LSZH	PVC, LSZH	PVC, LSZH	Steel, PVC	Steel, LSZH	PVC	PE, LSZH	PVC, LSZH
Joto la Uendeshaji.	-20°C to 70°C	-20°C to 70°C	-40°C to 85°C	-40°C to 85°C	-40°C to 85°C	-20°C to 70°C	-40°C to 85°C	-20°C to 70°C
Hesabu ya Fiber	2-144	2-144	2-288	2-72	2-144	12-144	12-288	2-24
Upinzani wa Kuponda	1000 N/cm	1000N/cm	800 N/cm	2000 N/cm	2200 N/cm	500 N/cm	1500 N/cm	800 N/cm

Types of Pre-Terminated Fiber Cables

Indoor/Outdoor Cables

These cables offer much flexibility here. They resist sun and water outside. A special gel will stop water coming. These cables handle cold temperatures. You can pick loose tube design. Because, they often use multimode fibers. Find them with different connector types. Its outer jacket is strong plastic. Receive long lengths for big jobs.

Breakout Cables

Breakout cables connect to gear easier. Each fiber has a small subunit. Consequently, connect without needing patch panels. Fan-out kits are not needed often. A colored jacket helps in finding. Find with LC or even SC ends. Commonly, they use a tight-buffered design. Often using for inside short run. Get some fiber quantity cables.

Patch Cables

These cables make short area links. They link gear within a server rack. Usually, length ranges one to ten meters. Get duplex LC for very fast links. Simplex kind are ready to use, too. Moreover, you can pick any jacket colors. These allow ten Gigabit Ethernet speeds. Connector boots add to the protection. Multimode fiber is often inside.

Distribution Cables

These cables handle many fibers well. They have a small tight buffer. So, they fit well inside buildings. Use the cables inside racks or walls. Find configurations from 12 up to 144. Options are MTP and even LC. Factory does termination for best work. Furthermore, meet needed fire-retardant rules.

Armored Cables

These cables give added safety. Metal layer is stopping any damage. This will help in tough workplaces. Animals cannot bite through it. The armor gives it crush resistance. However, the flexibility can be reduced. The cables can have outer jacket. You can use up to 72 fibers.

Key Advantages of DEKAM Pre-terminated Fiber Cables

Reduced Installation Time

DEKAM cables greatly reduce the labor. Pre-made ends mean no field work. Quickly connecting many fibers takes minutes. Avoid doing complex splicing ever again. So, projects finish much more quickly. Enjoy much quicker install times easily. Modular connectors provide rapid linking. Cables come with tested ends.

Tuma Uchunguzi Sasa
Enhanced Reliability

DEKAM cables give consistent optical power. Every connector passes the strict tests. Consequently, failures or loss reduce greatly. You can benefit from a long warranty. Cables will have a strong pull force. Obtain improved Return loss with factory. Connectors undergo machine-polishing process.

Tuma Uchunguzi Sasa
Cost-Effectiveness

DEKAM cables cut total expense. Reduced time lowers the on-site costs. You do not need expensive tools. Plus, there will be much less waste. The risk of mistakes is lower. Cables will offer very expected output. Save costs on fixes and checking. Return loss becomes very low.

Tuma Uchunguzi Sasa
Simplified Project Management

DEKAM makes planning very, very easy. Simply order the exact lengths. Because inventory tasks get minimized, resulting in faster jobs. You receive the ready solutions timely. Pre-testing removes any field checks. The compact design will save space. Finally, Cables have very clear labels.

Tuma Uchunguzi Sasa

Pakua Katalogi ya Bidhaa ya DEKAM

DEKAM

Katalogi ya Bidhaa ya DEKAM

PDF

DEKAM

PRE-TERMINATED FIBER CABLE CATALOG

PDF

PAKUA KATALOGU HARAKA

Ili kuokoa muda wako, tafadhali pakua katalogi yetu

Tazama Vipakuliwa Vyote

Reliable Fiber Optic Solutions – Choose DEKAM

DEKAM gives great fiber options. Gain from precisely made cables here. Get consistent low insertion loss. Our fiber cables use best glass. These ensure fast transmission always. Pick from connector styles freely. Receive cable lengths of many feet. Jackets could be PVC or others. Get the long system use warranty. Experience lower delays with products.

Tuma Uchunguzi Sasa

What Is A Pre-Terminated Fiber Optic Cable?

A cable has factory connectors fitted. Factory work gives best performance also. Polishing of the fiber is precise. Core size may include microns. Get fifty Meter cables.

Can I Customize The Length Of The Cable?

Yes, order needed, certain cable lengths. Cables arrive in one-meter steps. Custom lengths can reach two kilometers. The wait is often two weeks.

What Connector Options Are For Pre-Terminated Cables?

You have a few connector options. Common ones are LC, and SC. MTP connectors are also a option. These offer low dB loss.

How Does Pre-Termination Improve Network Reliability?

Factory ending controls all quality levels. This lowers signal loss or bending. Polishing done in field is gone. A good core size used.

Is Professional Installation Required For These Cables?

Installing is easier, but careful. Handle cables very gently always. Proper routing can help preventing harm. Using a pulling eye improves safety.

Tuma Uchunguzi wako Leo